Welcome: Xiamen ZoneWu Technology Co., LTD.
qui@zonewu.com 18146178586

Industry new

LoRaWAN IO Controller & Relay Module Selection Guide | Digital Input Output, Valve Controller - ZONEWU

LoRaWAN IO Controller & Relay Module Selection Guide: DI/DO Acquisition, Remote Switch, and Solenoid Valve Control

An IO controller (input/output module) sits between field sensors, switches, and actuators on one side and the IoT network or PLC on the other. It reads digital inputs from dry contacts, switches, or alarm contacts, drives digital outputs through relay or transistor channels to switch equipment on and off, and may add analog inputs for 4–20 mA or voltage signals. In irrigation and field sites, a valve controller is a dedicated IO device that drives solenoid valves for remote watering. This guide explains how to choose the right controller for channel counts, interface, mounting, and valve-drive needs.

ZONEWU IO controller and valve controller concept illustration

Step 1: Understand DI, DO, and AI Channels

  • DI (Digital Input): Reads dry-contact or switch states — door contact, limit switch, button, fault contact.
  • DO (Digital Output): Relay or switch output to control a load — motor, light, alarm, valve, or power contactor.
  • AI (Analog Input): Reads analog signals such as 4–20 mA or voltage from analog transmitters; needed when analog field instruments must be collected.

Count the contacts and actuators on site first, then choose a controller whose DI/DO/AI channels cover current needs plus headroom.

Step 2: Choose a Wireless IO Acquisition Controller

Relay switch module (5 DI + 5 DO). The ZW-ST600 Wireless IO Controller provides 5 digital inputs and 5 digital outputs with an RS485 interface, and supports LoRa-based wireless and star networking for remote relay switching. It suits equipment remote on-off, alarm interlock, and simple contact acquisition.

Acquisition controller with analog inputs (5 DI + 5 DO + 2 AI). The ZW-ST805 IO Acquisition Controller adds 2 analog inputs to the 5DI/5DO relay channels, with RS485 and a watchdog, for sites that must collect analog transmitter signals alongside relay control. Both units are designed for DIN-rail mounting in a control cabinet.

Controller Comparison (parameters from product specification tables)

ModelDIDOAIInterfaceNetworking / mounting
ZW-ST600 Wireless IO Controller (52)55—RS485LoRa TDMA wireless / star networking; DIN rail mount
ZW-ST805 IO Acquisition Controller (28)552RS485LPWAN wireless; watchdog; DIN rail mount

Step 3: Choose a Valve Controller for Irrigation and Remote Valves

Wired / battery valve controller. The ZW-ST300 Wireless Valve Controller drives an irrigation solenoid valve from a single valve output (12 V, 5 V optional), powered by 12/24 VDC with solar or battery options, in a 90×85×40 mm housing for wall or pole mounting. It suits remote valve switching in gardens, fields, and irrigation networks.

Solar LoRaWAN valve controller. The LW506S Solar Valve Controller runs on a 6V 0.88W solar panel plus two 2200 mAh rechargeable batteries, with battery life up to 5 years depending on lighting. The valve interface is chosen at purchase: 2 pulse solenoid valves, or 4 on/off solenoid valves. It mounts on a wall or pole (110×98×39 mm, 250 g), uses an external Type-C configuration port, and communicates over LoRaWAN (OTAA Class A/C).

Valve Controller Comparison

ModelPowerValve channelsMount / sizeCommunication
ZW-ST300 Wireless Valve Controller (45)12/24 VDC (solar, battery optional)1 valve output (12 V, 5 V optional)Wall or pole; 90×85×40 mmLoRaWAN; multi-region bands
LW506S Solar Valve Controller (186)Solar 6V 0.88W + 2×2200 mAh rechargeable batteries2 pulse solenoid valves, or 4 on/off solenoid valves (choose one)Wall or pole; 110×98×39 mm; 250 gLoRaWAN, OTAA Class A/C

Step 4: Networking with Gateways and DTUs

ZONEWU IO controller LoRaWAN network illustration

Wireless IO and valve controllers join a LoRaWAN network through an IoT Gateway, which uplinks data to the cloud and relays remote commands. For serial-based equipment, a DTU forwards RS485 or serial data to the network. RS485 channels on the controllers can also connect to a local PLC or control system.

Application Scenarios

  • Smart irrigation: Solar or battery valve controllers open and close solenoid valves by remote command or scheduled rules.
  • Equipment remote control: Relay modules switch pumps, lights, fans, and contactors from the cloud.
  • Alarm and interlock: DI contacts read fault or safety inputs; DO outputs trigger alarms or interlock responses.
  • Field and off-grid sites: Solar-powered controllers operate where grid power is unavailable.

FAQ

DI, DO, and AI — which do I need? Add up the dry contacts (DI), loads you must switch (DO), and analog transmitters (AI). Choose a module that covers them with headroom.

Relay or transistor output? The ST600/ST805 use relay-style DO channels; confirm the load voltage and current on the product page before connecting actuators.

How many valves can one solar controller drive? The LW506S supports either 2 pulse solenoid valves or 4 on/off solenoid valves, selected at purchase.

Can IO modules connect to a PLC? Yes, the RS485 interface links to a local PLC or control system; the wireless channel reports through a LoRaWAN gateway.

Conclusion

Count your DI/DO/AI channels first, pick a relay module or acquisition controller that matches the interface and DIN-rail cabinet, and choose a dedicated valve controller for irrigation. Review the ZW-ST600 IO Controller, ZW-ST805 Acquisition Controller, ZW-ST300 Valve Controller, and LW506S Solar Valve Controller, then network them through the IoT Gateway or a DTU.

CATEGORIES

CONTACT US

Contact: Qui

Phone: 18146178586

Tel: 18146178586

Email: qui@zonewu.com

Add: 1501-3, Building F03, Phase III, Software Park, Jimei District, Xiamen City, Fujian Province, China